Oak Wood Floor Sanding and Restoration in Brixham

Oak Wood Floor Finishing

The oak floor was then finished with a 4 coat system to give the floor the best protection and overall finish for the room. We used a Pallman 325 water-based primer. This primer gives the wood a natural look and doesn’t darken the wood as much as traditional finishes or solvent based primers.

Once the primer had time to cure we applied three coats of Pallx 98 Gold ensuring necessary ‘flatting back’ between coats to allow required adhesion. The 98 Gold finish is a commercial grade finish and gives ultimate protection and a beautiful matt sheen to the wooden floor.

Repair to Oak Wood Floor

Recently the wooden floor was accidentally damaged by a snooker ball. Two of our highly skilled technicians attended the large house in Brixham to carry out a repair to the floor. The repair work carried out caused minimal disruption to the snooker room. The dent in the oak flooring was first cleaned out and keyed to allow the Hot melt wax to properly adhere to the floor. Once the area was completely clean three wax shades were mixed together to achieve the colour of the oak. This wax was then applied to the repair and smoothed off to give an almost invisible repair to the floor. Not only does this prevent further problems in the future it also enables peace of mind that any small minor damage can be repaired with no major work needing to be carried out.